MItAC update (July 19, 2006)
- obtained reading material for phonograph/gramophone characteristics
- rectangular stitching familiarization: specify length/width, and current FOV will be lower left
- circular stitching familiarization: specify inner/outer diameter (circular or annulus), optionally can select "learn" to manually pinpoint outer left edge/top edge/bot edge, etc., where it seems we were sometimes able to crash Vision, and once crash Windows in this manual mode (suspected it may be due to improper manual specification of annulus)
- ignoring bug, it appears that annulus stitch could be used to scan an entire record, so long as backscan and length are sufficient to account for surface height changes
- rectangular stitching familiarization: specify length/width, and current FOV will be lower left
- circular stitching familiarization: specify inner/outer diameter (circular or annulus), optionally can select "learn" to manually pinpoint outer left edge/top edge/bot edge, etc., where it seems we were sometimes able to crash Vision, and once crash Windows in this manual mode (suspected it may be due to improper manual specification of annulus)
- blue screen: "The problem seems to be caused by the following file: bcam.sys"
- PAGE_FAULT_IN_NONPAGED_AREA
- Technical Information: STOP: 0x00000050 (0xE0617000, 0x00000001, 0xF77192DD, 0x00000000)
- bcam.sys
- stage file stitching familiarization: not yet started- Technical Information: STOP: 0x00000050 (0xE0617000, 0x00000001, 0xF77192DD, 0x00000000)
- bcam.sys
- Address F77192DD
- Base at F7712000
- Date stamp 416ffae0
- Base at F7712000
- Date stamp 416ffae0
- ignoring bug, it appears that annulus stitch could be used to scan an entire record, so long as backscan and length are sufficient to account for surface height changes
posted by Simon at 10:31 AM
0 Comments:
Post a Comment
<< Home